B-7672 Robe Hook


7672

View larger image

CODE: B-7672
Price: $8.71
60 days
Bobrick with 2-3 day lead time


Remember old fashioned customer service?  So do we.   US Builder Supply
Rated best customer service 4 years in a row!
 
Description
 

 

**Bobrick Ordering Notes**

We ship most Bobrick items from the factory directly to you.  This lowers shipping costs as Bobrick has multiple warehouse locations throughout the country. 

This does have a drawback, however.  Bobrick imposes a $ 15.00 minimum order fee for orders less than $ 150.00

We'll add this amount to your order if it is less than the $ 150.00 minimum.

 

 

 

US Builder Supply Notes

This site lists items most commonly ordered.  We also stock many odds and ends, but in small quantities only and don't list them here.  Feel free to call if you need an item you don't see.

 

Double Robe Hook, Bright Finish

Bright-polished stainless steel.
Contoured 4" (100mm) wide bar forms hook at each end.



MATERIALS:
Flange & Support Arm 18-8 S, type-304, 22-gauge (0.8mm) stainless steel. Concealed, 18-gauge (1.2mm) stainless steel
mounting bracket. All-welded construction. Secured to wall plate with a stainless steel setscrew.
Concealed Wall Plate 18-8 S, type-304, 19-gauge (1.0mm) stainless steel.
Cap 18-8 S, type-304, 14-gauge (2.0mm) stainless steel. Welded to the support arm.
INSTALLATION:
To remove concealed wall plate from back of flange and mounting bracket, loosen setscrew. Mount wall plate so prongs are
at top; secure with two sheet-metal screws, furnished by manufacturer, at points indicated by an S. Engage mounting bracket
onto prongs of wall plate, then secure unit into position by tightening setscrew at bottom of flange.
For plaster or dry wall construction, provide concealed backing to comply with local building codes, then secure unit with
sheet-metal screws furnished. For other wall surfaces, provide fiber plugs or expansion shields for use with screws
furnished, or provide 1/8" (3mm) toggle bolts or expansion bolts.
For partitions with particle-board or other solid core, secure with sheet-metal screws furnished, or provide through-bolts,
nuts, and washers. For hollow-core metal partitions, provide solid backing into which the furnished sheet-metal screws can
be secured.
SPECIFICATION:
Surface-mounted double robe hook shall be type-304 stainless steel with __________ (insert one: bright polished or satin)
finish. Flange and support arm shall be 22 gauge (0.8mm) and equipped with a concealed, 18-gauge (1.2mm) mounting
bracket that is secured to a concealed, 19-gauge (1.0mm) wall plate with a stainless steel setscrew. Cap shall be 14 gauge
(2.0mm), welded to the support arm.
Loading...